Description
63-3120 K&N Perf. Intake System
Product Description
The K&N 63-3120 Air Intake fits some Chevrolet Corvette vehicles. See vehicle applications below for details.
The K&N 63-3120 Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Chevrolet Corvette vehicles. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine’s RPM range. The 63-3120 air intake comes with a black rubber topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive silver powder-coat finish that's made to last and it accommodates the factory mass air sensor, breather hose and crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, pliers, ratchet set and some wrenches.
Product Features
- Guaranteed to increase horsepower.
- Designed to improve throttle response and engine sound.
- Washable and reusable lifetime air filter.
- Low restriction aluminum tube.
- Lasts up to 100,000 miles before service is required (depending on driving conditions).
- Replaces stock air intake system.
- Easy to install, usually in 90 minutes or less.
- K&N Million Mile Limited Warranty.
Product Specifications
|
Estimated Horsepower Gain |
22.28 HP @ 5000 RPM |
|
Replacement Filter |
RP-6103 |
|
Air Filter Color |
Red |
|
Air Filter Material |
Cotton Gauze |
|
Air Filter Outlet Shape |
Round |
|
Clamps Included |
3 |
|
Clamp Material |
Stainless Steel |
|
Clamp Style |
Worm Gear |
|
Couplers Included |
1 |
|
Product Style |
63 Series Aircharger Kits |
|
Intake Pipe Color / Finish |
Black |
|
Intake Pipe Material |
High-Density Cross-Linked Polyethylene |
|
Street Legal In All US States |
|
|
TUV Approved (Europe) |
No |
|
Weight |
22.5 lb (10.2 kg) |
|
Product Box Height |
10.25 in (260 mm) |
|
Product Box Length |
36.19 in (919 mm) |
|
Product Box Width |
18.13 in (460 mm) |
|
California Restricted |
Not legal for sale or use in California |
|
Mounting Hardware Included |
Yes |
|
Warranty |
1,000,000 Miles/10 Year |
This Part Fits these Vehicles
|
Make |
Model |
Years |
Notes & Specs |
|
Chevrolet |
Corvette |
2020-2021 |
6.2L V8 |
